Folded

March 2011

This yarn was a Christmas present bought for me by a generous friend during a trip to New York. It's always lovely to have other people buy you yarn, especially when they have only the vaguest of ideas about what you usually knit with, because you can end up with some wonderful surprises.

I wanted a fairly simple pattern for this yarn so that the beautiful colour changes didn't get lost under some fancy detail or other. Having been sorely tempted by Clara and Myrtle I settled on Folded, because it looked like the sort of sweater I could get a lot of use from.

All that stocking stitch in such a lightweight yarn was pretty tedious, and as a result I took about three months to get this done.

Some fairly minor mods:

• I added a little length (about half an inch or so);

• 3 of the pleats are supposed to lean one way and 3 the other (so that they're all facing inwards). It doesn't bother me, but I think I must have done something wrong, because mine all seem to face the same way;

• I made the sleeves flat and seamed them, because in order to knit them in the round, I would have needed to use DPNs, and I found it very difficult to get a neat result that way (due, I think, to a fatal combination of lightweight yarn and fairly heavy wooden DPNs); and

• I added 6 rows of garter stitch at the neckline. The pattern would have you work it in stocking stitch, but I found it rolled over on itself that way.

Normally I would have added a bit of a bust-dart too, but this is fairly loose fitting and I didn't really see the need. As a result it's roomier around my hips and waist than around my bust, but I don't mind that. Being quite loosely knit, the Malabrigo sock has a really lovely drape.

Pattern: Folded by Veera Välimäki

Yarn: Malabrigo Sock

Amount: About 2.2 skeins

Colourway: Rayon Vert

Needles: 3.50mm

Size: Small

On ravelry: here

Wintergreen Mittens

March 2011

My Mum has a habit of buying yarns without a specific project in mind. This is A Good Thing, because sometimes they get donated to me, and I have a hunt around for something suitable. In this instance, I discovered Kate Gilbert's Wintergreen Mittens and immediately decided I had to make them. If only because I couldn't for the life of me work out how the leaf pattern was actually made.

March may not really be the ideal time of year to make mittens, but when you only have one skein of something, your options can be limited. And anyway, it's Mother's Day soon, and I'll seize upon any opportunity to make a knitted gift.

My husband loves this pattern so much he wants me to adapt it and make a cushion or something, which I may well do one day.

For now I'm glad I learned the technique of twisting stitches in stranded knitting on something fairly small.

Hard work, but so worth it.

Pattern: Wintergreen Mittens by Kate Gilbert

Yarn: Sirdar Click dk with wool (MC) and King Cole Merino Blend dk (CC)

Amount: 1 skein of each

Colourway: 128 Tarn (MC) / 41 Oatmeal (CC)

Needles: 2.75mm

Size: dk size

On ravelry: here

Buttercup

March 2011

Thanks to using a recycled yarn and a freebie pattern, the total project cost for this was £7.25 - not bad for a sweater which I think I'm going to get a LOT of use from.

The yarn has previously been Chantal, which was nice enough, but I'd made it a little on the large side, and anyway I'm increasingly less convinced about crew-necked sweaters on me. So I frogged it, wound it into loose hanks, tied some white cotton around them to keep them tidy, soaked them in the bath for an hour, rolled them in some towels to help dry them off and let them hang from hooks with a little bit of weight attached. Once dried, there were no kinks left at all - and the yarn knitted up as good as new.

I did need to buy one extra skein in order to make the sleeves, and since I'd finished the body at that point, I wound it into two balls of equal weight, one for each sleeve, and made them as long as that would allow (around 57 rows as it turns out). I really like the end result though - it's very practical.

I also reshaped this from an a-line into a fitted sweater with bust darts because I thought that would flatter my figure best. Full details of how I did it can be found on my ravelry page.

As far as I can see there was no noticeable difference between the yarn I'd recycled and the top-up supplies I ordered, colour wise. They did come from the same shop, though, and so it's possible that I matched dyelots without realising.

Pattern: Buttercup by Heidi Kirrmaier

Yarn: Berroco Ultra Alpaca Light

Amount: 6 skeins

Colourway: 4212 Gordoba Grape

Needles: 3.50mm

Size: Custom

On ravelry: here

Modern Garden Cardigan

February 2011

I think I must have bought this yarn shortly after it first came out. Sirdar yarns are so reasonably priced that when you spot something you like the look of, it's hard to resist (next on my wishlist to try out is Eco Wool dk).

The difficulty is - in my opinion at least - that Sirdar's pattern support tends to be rather less fashion led than the likes of Rowan and Berroco and is certainly less comprehensive. It's no coincidence that the other project I have completed using this yarn wasn't designed specifically for it either.

So having got your three bags full home and safely stashed it's not always immediately obvious what to do next. But then I spotted a version of this cardigan on ravelry, and right away realised the wait had been worthwhile.

My gauge was way off with this project even with the yarn held double. To compensate I made a size medium whereas I would usually have opted for a small, and added a bit of length to make up for my row-gauge by using a larger chart than the pattern had intended.

Overall, I'm pretty happy with it, fit-wise and very impressed by the design. It only took about a week (despite a slight misunderstanding on my part regarding the yoke decreases), and you can't beat a bit of instant gratification!

Pattern: Modern Garden Cardigan by Veera Välimäki

Yarn: Sirdar Tweedie Chunky

Amount: 10 skeins

Colourway: 284 Roasted Berry

Needles: 8.00mm

Size: Medium

On ravelry: here

Cable and Cowl Pullover

February 2011

This pretty pretty yarn has had quite an innings. First it was Francis Revisited and then it was recycled into a Textured Tunic but neither of those felt quite right, fit-wise, and so it lives again as Matthew Gnagy's Cable and Cowl Pullover (which was available as free ravelry download at the time).

The original version of this sweater is worked from the bottom up, flat with shorter sleeves which are made seamlessly by casting on and then casting off extra stitches at the armholes. They are decorated with the same cables as the body and - after a hole has been made for the neckline - carried on straight up and over the back so that they can be folded over at the shoulder.

This is a rough guide to what I did, with profuse apologies if my maths doesn't quite work out. I did a really bad job of making notes this time.

My version has full length set-in sleeves in the same Irish Moss Stitch which frames the cabled section in the body of the sweater. I find cowl-necked sweaters so warm to wear that I thought it would be more practical like that.

I worked the body from the bottom up in the round (which meant messing about with the written instructions for the cabled sections a bit on the even rows so that all the purl stitches were knitted and vice versa, but that was easily done). I added waist shaping by decreasing 4 stitches every fifth round three times and then increasing again around where I thought my waist would be.

When I got to about 14.5" long I split the front and back onto separate circular needles and (starting with the back because I was fudging it) worked back and forth to make armholes for set in sleeves by casting off two stitches at the beginning of the next two rows and then decreasing one stitch at the beginning of the next six rows.

I then worked even back and forth until the total length of the sweater was about 20" before making the neckline by casting off the centre 22 or so stitches and - taking each side separately - working a few more rows with decreases on the neckline side until there were about 5 stitches left for the shoulder seams (which were eventually sewn together). Following the cowl instructions as written worked out fine.

The sleeves were also worked in the round on DPNs starting with 18 rows of 2x2 ribbing over 48 stitches with decreases every sixth row and then after switching to larger needles and Irish Moss I worked a further 82 rows increasing 2 stitches evenly every tenth row or so to 56 stitches (about 18.5" long).

To mirror the armhole shaping, I made the sleeve cap by casting off two at the start of rows 101 and 102 and then decreased one stitch at each end of rows 103 through 109. I worked the rest of the sleeve cap by decreasing at each end of every other row until there were about 8 stitches left.

Pattern: Cable and Cowl Pullover by Matthew Gnagy

Yarn: Sirdar Peru Naturals

Amount: 8.5 skeins

Colourway: Machu Picchu

Needles: 5.00mm and 5.50mm

Size: Small

On ravelry: here

Kalajoki

February 2011

My second ever pair of socks, and I love this pair too! As with the first pair, these were made cuff-down, but they have something called an anatomical toe, which was new to me.

I was looking for something that would appeal to men without being too plain and boring to knit, and these really fitted the bill, with that gorgeous travelling rib. The Regia is very pretty too, and as easy to wash as shop-bought socks, which is great.

The fit isn't bad, but that's more luck that judgement, because these were a birthday surprise for my husband. I did sneakily raid his sock drawer a few times just to check I was in the right ball-park, but socks are so stretchy that it was a bit of an inexact science. They stay up though, and that's what counts.

Pattern: Kalajoki by Tiina Seppälä

Yarn: Schachenmayr nomotta Regia Color 4-ply / 4-fädig

Amount: 1.5 skeins

Colourway: 1933 Denim Schwarz

Needles: 3.50mm

Size: One Size

On ravelry: here

bmp(ish)

February 2010

Ever since I saw a Space Invaders chart on ravelry I've been dying to try it out. With Valentine's Day around the corner, several half used skeins of Felted Tweed to hand and a charmingly geeky husband, now seemed as good a time as any.

Whilst the inspiration for these socks was bmp from the Spring 2007 Knitty, I wanted to make it with a dk yarn, rather than a 4-ply which the pattern called for. That was easily done - I just used this freebie dk sock pattern and re-drew the Space Invader charts based in the number of stitches I would have. Turns out there's enough for four repeats of each motif.

I'm not especially good at stranded work yet, and these charts do call for some very long floats. As a result the colourwork sections of these socks are probably much tighter than they should be, and although I can just about get them over my heels (v-e-r-y carefully), my husband can't. So I took a few inches off the length of the feet, and kept them myself. He's a bit jealous, though, and so I'm determined to figure out how to make a pair he will be able to get on...

Felted Tweed makes lovely socks - it's soft and warm and (allegedly) machine washable. For my first ever pair of socks, I'm very happy with these.

Pattern: bmp by Aija Goto from knitty.com

Yarn: Rowan Felted Tweed

Amount: 1.5 skeins (MC)

Colourway: 170 Seafarer (MC), 165 Scree (pale blue), 148 Sigh (discontinued) (purple), 146 Herb (green) and 171 Paisley (red)

Needles: 3.25mm

Size: Custom

On ravelry: here